diff --git a/multi/multi__hystrix_timeouts_and_ribbon_clients.html b/multi/multi__hystrix_timeouts_and_ribbon_clients.html index db247b49b..e7d1926a4 100644 --- a/multi/multi__hystrix_timeouts_and_ribbon_clients.html +++ b/multi/multi__hystrix_timeouts_and_ribbon_clients.html @@ -55,4 +55,9 @@ The Turbine Stream server requires the use of Spring Webflux, therefore spring-boot-starter-webflux is included when adding spring-cloud-starter-netflix-turbine-stream to your application.

You can then point the Hystrix Dashboard to the Turbine Stream Server instead of individual Hystrix streams. If Turbine Stream is running on port 8989 on myhost, then put http://myhost:8989 in the stream input field in the Hystrix Dashboard. Circuits are prefixed by their respective serviceId, followed by a dot (.), and then the circuit name.

Spring Cloud provides a spring-cloud-starter-netflix-turbine-stream that has all the dependencies you need to get a Turbine Stream server running. -You can then add the Stream binder of your choice — such as spring-cloud-starter-stream-rabbit.

Prev   Next
4. Circuit Breaker: Hystrix Dashboard Home 6. Client Side Load Balancer: Ribbon
\ No newline at end of file +You can then add the Stream binder of your choice — such as spring-cloud-starter-stream-rabbit.

Turbine Stream server also supports the cluster parameter. +Unlike Turbine server, Turbine Stream uses eureka serviceIds as cluster names and these are not configurable.

If Turbine Stream server is running on port 8989 on my.turbine.server and you have two eureka serviceIds customers and products in your environment, the following URLs will be available on your Turbine Stream server. default and empty cluster name will provide all metrics that Turbine Stream server receives.

http://my.turbine.sever:8989/turbine.stream?cluster=customers
+http://my.turbine.sever:8989/turbine.stream?cluster=products
+http://my.turbine.sever:8989/turbine.stream?cluster=default
+http://my.turbine.sever:8989/turbine.stream

So, you can use eureka serviceIds as cluster names for your Turbine dashboard (or any compatible dashboard). +You don’t need to configure any properties like turbine.appConfig, turbine.clusterNameExpression and turbine.aggregator.clusterConfig for your Turbine Stream server.

[Note]Note

Turbine Stream server gathers all metrics from the configured input channel with Spring Cloud Stream. It means that it doesn’t gather Hystrix metrics actively from each instance. It just can provide metrics that were already gathered into the input channel by each instance.

Prev   Next
4. Circuit Breaker: Hystrix Dashboard Home 6. Client Side Load Balancer: Ribbon
\ No newline at end of file diff --git a/multi/multi__service_discovery_eureka_clients.html b/multi/multi__service_discovery_eureka_clients.html index af9d712ac..c53ea7347 100644 --- a/multi/multi__service_discovery_eureka_clients.html +++ b/multi/multi__service_discovery_eureka_clients.html @@ -28,12 +28,13 @@ By having spring-cloud-starter-netflix-eureka-client

In the preceding example, "defaultZone" is a magic string fallback value that provides the service URL for any client that does not express a preference (in other words, it is a useful default).

The default application name (that is, the service ID), virtual host, and non-secure port (taken from the Environment) are ${spring.application.name}, ${spring.application.name} and ${server.port}, respectively.

Having spring-cloud-starter-netflix-eureka-client on the classpath makes the app into both a Eureka “instance” (that is, it registers itself) and a “client” (it can query the registry to locate other services). The instance behaviour is driven by eureka.instance.* configuration keys, but the defaults are fine if you ensure that your application has a value for spring.application.name (this is the default for the Eureka service ID or VIP).

See EurekaInstanceConfigBean and EurekaClientConfigBean for more details on the configurable options.

To disable the Eureka Discovery Client, you can set eureka.client.enabled to false.

1.3 Authenticating with the Eureka Server

HTTP basic authentication is automatically added to your eureka client if one of the eureka.client.serviceUrl.defaultZone URLs has credentials embedded in it (curl style, as follows: http://user:password@localhost:8761/eureka). For more complex needs, you can create a @Bean of type DiscoveryClientOptionalArgs and inject ClientFilter instances into it, all of which is applied to the calls from the client to the server.

[Note]Note

Because of a limitation in Eureka, it is not possible to support per-server basic auth credentials, so only the first set that are found is used.

1.4 Status Page and Health Indicator

The status page and health indicators for a Eureka instance default to /info and /health respectively, which are the default locations of useful endpoints in a Spring Boot Actuator application. -You need to change these, even for an Actuator application if you use a non-default context path or servlet path (such as server.servletPath=/custom) or management endpoint path (such as management.contextPath=/admin). The following example shows the default values for the two settings:

application.yml.  +You need to change these, even for an Actuator application if you use a non-default context path or servlet path (such as server.servletPath=/custom). The following example shows the default values for the two settings:

application.yml.  

eureka:
   instance:
-    statusPageUrlPath: ${management.server.servlet.context-path}/info
-    healthCheckUrlPath: ${management.server.servlet.context-path}/health

-

These links show up in the metadata that is consumed by clients and are used in some scenarios to decide whether to send requests to your application, so it is helpful if they are accurate.

1.5 Registering a Secure Application

If your app wants to be contacted over HTTPS, you can set two flags in the EurekaInstanceConfig:

Doing so makes Eureka publish instance information that shows an explicit preference for secure communication. + statusPageUrlPath: ${server.servletPath}/info + healthCheckUrlPath: ${server.servletPath}/health

+

These links show up in the metadata that is consumed by clients and are used in some scenarios to decide whether to send requests to your application, so it is helpful if they are accurate.

[Note]Note

In Dalston it was also required to set the status and health check URLs when changing +that management context path. This requirement was removed beginning in Edgware.

1.5 Registering a Secure Application

If your app wants to be contacted over HTTPS, you can set two flags in the EurekaInstanceConfig:

Doing so makes Eureka publish instance information that shows an explicit preference for secure communication. The Spring Cloud DiscoveryClient always returns a URI starting with https for a service configured this way. Similarly, when a service is configured this way, the Eureka (native) instance information has a secure health check URL.

Because of the way Eureka works internally, it still publishes a non-secure URL for the status and home pages unless you also override those explicitly. You can use placeholders to configure the eureka instance URLs, as shown in the following example:

application.yml.  diff --git a/single/spring-cloud-netflix.html b/single/spring-cloud-netflix.html index 1d4e5d401..c8054cb3f 100644 --- a/single/spring-cloud-netflix.html +++ b/single/spring-cloud-netflix.html @@ -33,12 +33,13 @@ By having spring-cloud-starter-netflix-eureka-client

In the preceding example, "defaultZone" is a magic string fallback value that provides the service URL for any client that does not express a preference (in other words, it is a useful default).

The default application name (that is, the service ID), virtual host, and non-secure port (taken from the Environment) are ${spring.application.name}, ${spring.application.name} and ${server.port}, respectively.

Having spring-cloud-starter-netflix-eureka-client on the classpath makes the app into both a Eureka “instance” (that is, it registers itself) and a “client” (it can query the registry to locate other services). The instance behaviour is driven by eureka.instance.* configuration keys, but the defaults are fine if you ensure that your application has a value for spring.application.name (this is the default for the Eureka service ID or VIP).

See EurekaInstanceConfigBean and EurekaClientConfigBean for more details on the configurable options.

To disable the Eureka Discovery Client, you can set eureka.client.enabled to false.

1.3 Authenticating with the Eureka Server

HTTP basic authentication is automatically added to your eureka client if one of the eureka.client.serviceUrl.defaultZone URLs has credentials embedded in it (curl style, as follows: http://user:password@localhost:8761/eureka). For more complex needs, you can create a @Bean of type DiscoveryClientOptionalArgs and inject ClientFilter instances into it, all of which is applied to the calls from the client to the server.

[Note]Note

Because of a limitation in Eureka, it is not possible to support per-server basic auth credentials, so only the first set that are found is used.

1.4 Status Page and Health Indicator

The status page and health indicators for a Eureka instance default to /info and /health respectively, which are the default locations of useful endpoints in a Spring Boot Actuator application. -You need to change these, even for an Actuator application if you use a non-default context path or servlet path (such as server.servletPath=/custom) or management endpoint path (such as management.contextPath=/admin). The following example shows the default values for the two settings:

application.yml.  +You need to change these, even for an Actuator application if you use a non-default context path or servlet path (such as server.servletPath=/custom). The following example shows the default values for the two settings:

application.yml.  

eureka:
   instance:
-    statusPageUrlPath: ${management.server.servlet.context-path}/info
-    healthCheckUrlPath: ${management.server.servlet.context-path}/health

-

These links show up in the metadata that is consumed by clients and are used in some scenarios to decide whether to send requests to your application, so it is helpful if they are accurate.

1.5 Registering a Secure Application

If your app wants to be contacted over HTTPS, you can set two flags in the EurekaInstanceConfig:

Doing so makes Eureka publish instance information that shows an explicit preference for secure communication. + statusPageUrlPath: ${server.servletPath}/info + healthCheckUrlPath: ${server.servletPath}/health

+

These links show up in the metadata that is consumed by clients and are used in some scenarios to decide whether to send requests to your application, so it is helpful if they are accurate.

[Note]Note

In Dalston it was also required to set the status and health check URLs when changing +that management context path. This requirement was removed beginning in Edgware.

1.5 Registering a Secure Application

If your app wants to be contacted over HTTPS, you can set two flags in the EurekaInstanceConfig:

Doing so makes Eureka publish instance information that shows an explicit preference for secure communication. The Spring Cloud DiscoveryClient always returns a URI starting with https for a service configured this way. Similarly, when a service is configured this way, the Eureka (native) instance information has a secure health check URL.

Because of the way Eureka works internally, it still publishes a non-secure URL for the status and home pages unless you also override those explicitly. You can use placeholders to configure the eureka instance URLs, as shown in the following example:

application.yml.  @@ -336,7 +337,12 @@ The Turbine Stream server requires the use of Spring Webflux, therefore spring-boot-starter-webflux is included when adding spring-cloud-starter-netflix-turbine-stream to your application.

You can then point the Hystrix Dashboard to the Turbine Stream Server instead of individual Hystrix streams. If Turbine Stream is running on port 8989 on myhost, then put http://myhost:8989 in the stream input field in the Hystrix Dashboard. Circuits are prefixed by their respective serviceId, followed by a dot (.), and then the circuit name.

Spring Cloud provides a spring-cloud-starter-netflix-turbine-stream that has all the dependencies you need to get a Turbine Stream server running. -You can then add the Stream binder of your choice — such as spring-cloud-starter-stream-rabbit.

6. Client Side Load Balancer: Ribbon

Ribbon is a client-side load balancer that gives you a lot of control over the behavior of HTTP and TCP clients. +You can then add the Stream binder of your choice — such as spring-cloud-starter-stream-rabbit.

Turbine Stream server also supports the cluster parameter. +Unlike Turbine server, Turbine Stream uses eureka serviceIds as cluster names and these are not configurable.

If Turbine Stream server is running on port 8989 on my.turbine.server and you have two eureka serviceIds customers and products in your environment, the following URLs will be available on your Turbine Stream server. default and empty cluster name will provide all metrics that Turbine Stream server receives.

http://my.turbine.sever:8989/turbine.stream?cluster=customers
+http://my.turbine.sever:8989/turbine.stream?cluster=products
+http://my.turbine.sever:8989/turbine.stream?cluster=default
+http://my.turbine.sever:8989/turbine.stream

So, you can use eureka serviceIds as cluster names for your Turbine dashboard (or any compatible dashboard). +You don’t need to configure any properties like turbine.appConfig, turbine.clusterNameExpression and turbine.aggregator.clusterConfig for your Turbine Stream server.

[Note]Note

Turbine Stream server gathers all metrics from the configured input channel with Spring Cloud Stream. It means that it doesn’t gather Hystrix metrics actively from each instance. It just can provide metrics that were already gathered into the input channel by each instance.

6. Client Side Load Balancer: Ribbon

Ribbon is a client-side load balancer that gives you a lot of control over the behavior of HTTP and TCP clients. Feign already uses Ribbon, so, if you use @FeignClient, this section also applies.

A central concept in Ribbon is that of the named client. Each load balancer is part of an ensemble of components that work together to contact a remote server on demand, and the ensemble has a name that you give it as an application developer (for example, by using the @FeignClient annotation). On demand, Spring Cloud creates a new ensemble as an ApplicationContext for each named client by using diff --git a/spring-cloud-netflix.xml b/spring-cloud-netflix.xml index fc6d84323..63b0bc01e 100644 --- a/spring-cloud-netflix.xml +++ b/spring-cloud-netflix.xml @@ -76,17 +76,21 @@ For more complex needs, you can create a @Bean of type Status Page and Health Indicator The status page and health indicators for a Eureka instance default to /info and /health respectively, which are the default locations of useful endpoints in a Spring Boot Actuator application. -You need to change these, even for an Actuator application if you use a non-default context path or servlet path (such as server.servletPath=/custom) or management endpoint path (such as management.contextPath=/admin). The following example shows the default values for the two settings: +You need to change these, even for an Actuator application if you use a non-default context path or servlet path (such as server.servletPath=/custom). The following example shows the default values for the two settings: application.yml eureka: instance: - statusPageUrlPath: ${management.server.servlet.context-path}/info - healthCheckUrlPath: ${management.server.servlet.context-path}/health + statusPageUrlPath: ${server.servletPath}/info + healthCheckUrlPath: ${server.servletPath}/health These links show up in the metadata that is consumed by clients and are used in some scenarios to decide whether to send requests to your application, so it is helpful if they are accurate. + +In Dalston it was also required to set the status and health check URLs when changing +that management context path. This requirement was removed beginning in Edgware. +

Registering a Secure Application @@ -655,6 +659,18 @@ If Turbine Stream is running on port 8989 on myhost, then put serviceId, followed by a dot (.), and then the circuit name. Spring Cloud provides a spring-cloud-starter-netflix-turbine-stream that has all the dependencies you need to get a Turbine Stream server running. You can then add the Stream binder of your choice — such as spring-cloud-starter-stream-rabbit. +Turbine Stream server also supports the cluster parameter. +Unlike Turbine server, Turbine Stream uses eureka serviceIds as cluster names and these are not configurable. +If Turbine Stream server is running on port 8989 on my.turbine.server and you have two eureka serviceIds customers and products in your environment, the following URLs will be available on your Turbine Stream server. default and empty cluster name will provide all metrics that Turbine Stream server receives. +http://my.turbine.sever:8989/turbine.stream?cluster=customers +http://my.turbine.sever:8989/turbine.stream?cluster=products +http://my.turbine.sever:8989/turbine.stream?cluster=default +http://my.turbine.sever:8989/turbine.stream +So, you can use eureka serviceIds as cluster names for your Turbine dashboard (or any compatible dashboard). +You don’t need to configure any properties like turbine.appConfig, turbine.clusterNameExpression and turbine.aggregator.clusterConfig for your Turbine Stream server. + +Turbine Stream server gathers all metrics from the configured input channel with Spring Cloud Stream. It means that it doesn’t gather Hystrix metrics actively from each instance. It just can provide metrics that were already gathered into the input channel by each instance. +